Auction Information
Tractors:
1981 John Deere 4440, Quad Range, 11,450 hours, Heat/AC, 3 hydraulics, 540/1000 PTO, 3 point, 18.4R38 rears, with John Deere 265 loader, pallet forks, and 7’ bucket, SN: 043933R
Oliver 880 2wd tractor with 345 Dual Loader, wide front, power steering, PTO live pump, live PTO, snow bucket, chains and bale spear, all rebuilt cylinders on loader, 15.5-38 rear tires, just added fluid to rear tires
1971 International Farmall 1066 Turbo, diesel, 18.4-38 rears, 540/1000 PTO, 3pt, rear HID lights, roll bar, hrs unknon, SN: 2610159U007511
1950 John Deere G, Older Restoration, new tires, Overhaled, Runs as it Should, SN: 43492
1928 John Deere D, on Steel, Engine is NOT stuck, Not Running, Needs a Mag, with Lugs and Rings, SN: 70214
Sprayers:
2011 Top Air TA 1200, 90’ boom, adjustable axles, single tires, SN: B29 950 108
WilRich 3pt mounted sprayer, 500 gallon, 60’ boom, has foam (not on sprayer, but goes with)
Hardy TR500 41.5’ pull type sprayer, 3 piston pump, 3 section shut off with controller box, SN: 190317
Redball 670 Sprayer, 80’ booms with Hydraulic Fold, Raven 450 Monitor, working order, has not been used in a couple of years, SN: 04-02259
Hardi Navigator 1000, 60’ boom, 3 way nozzles (blue new last year), 13.6-38 good rubber, 1000 PTO, fresh water tank, adjustable axles, Hardi Monitor and boom control with joystick for fold out, SN: 10250
Ag Chem 180 gal saddle tanks w/brackets off JD 4640, Raven sprayer control, pump in unknown condition
Planting/Seed Equipment:
USC, LLC MX2500 Seed Treater and Control Box, Fully Automated with Fully Automated bin site control, (up to 4 bins), Treated Bypass, Software Version 1.3, Stainless Steel Drum, with 15,000lb hopper, everything is in working order
Friesen Seed Titan Seed Tender, Honda 5.5 HP motor, SN: 23078
John Deere 1520 20’ Grain Press Drill, 3pt, SN: 665102
John Deere 7300 Maxi Merge Planter, 12 Row 22”, vacuum, Precision corn plates, lift assist, 250 John Deere monitor, always shedded, SN: 107500
John Deere Model 8300 Drill, 13’, 6” spacing with grass seeder, press wheel attachment, SN: 048444N
Hiniker 4836 air seeder, 40, 15” spacing, Hiniker monitor, seed rebounders, 425/65R22.5 good rubber, in working order
International 800 Cyclo planter, 12 row 30”, corn and bean drums, liquid fertilizer setup (unknown working condition), has Monitor, SN: 14965
John Deere 2 row wheel driven corn planter with markers
(12) Seed tubes for John Deere planter with sensors
(12) Total tubular for liquid fertilizer on John Deere planter
Tillage Equipment:
Sunflower 1435 Disk, 29.5’, good disks, 3 bar coil tine harrow, one owner, hyd leveling, tandems on wings, front gauge wheels, 12.5L-15FI rubber, SN: 1435108366
John Deere 980 Field Cultivator, 42.5’, walking tandems, 3 bar coil tine harrow, rear hitch, SN: 010967
International 4500 Field Cultivator, 30’, fold up wings, 3 bar harrow (all sweeps, tines on drags and bushings replaced 100 acres ago)
16/22 Cultivator, can be made into a 12/30, fold up wings, Brand unknown
Phoenix H14 42’ Rotary Harrow
John Deere 400 Rotary Hoe
Kewanne Model 1100 disc, 21’, with fold up wings, 18” blades, 8.5” spacing, tandem axles, 2 bar Noble harrow
Alloway Model 2135 3pt cultivator, 12/22, rolling shields
Dakon 12/22 rear mount cultivator, rolling shields, Danish teeth
Sunfower 7252-40 Rolling Basket Crumbler, 40’, SN: 20060008
IHC 183 Cultivator, 8 row 30” with rolling shields, good shape
IHC 490, 20’ Disk with hydraulic wings, good shape
International 183 Cultivator, 16 Row 30”, hydraulic flat fold wings, 3pt
IH Model 710 Plow, 4-18’s, auto trip
Trucks:
1990 Freightliner Semi Tractor, CAT 3406 engine, 10 speed transmission, 1.125 Million Miles, 11R22.5 rubber, dual fuel tanks, sleeper, VIN: 392412
GMC Top Kick feed truck, Twin Screw, 3208 CAT engine, 10 speed transmission, 20’ Box with 4 compartments, 11R22.5 Rears, 11R22.5 Fronts (radials)
1973 Chevrolet C65 Grain Truck, 14’ box and hoist, holds 300 bushels, twin cylinder hoist, 10:00x20 rubber, 5+2 trans, VIN: 162183
Snow Blower:
Buhler/Allied 9620 dual stage 8’ snow blower, 540 PTO, hydraulic spout, SN: 96004903
Hay Equipment:
2014 New Holland 560 Round Baler, Approx 2150 bales, Specialty Crop, 1000 PTO, Net Wrap, Monitor Included, 21.5L-16.1 tires, SN: 182798
Accelerator for a 5000 Series John Deere silage cutter
Sitrex 3pt 5 wheel rake, used very little, SN: 261219
Dryers/Grain Bin Equipment:
AB 250 dryer, single phase, LP, has been gone through ready for 2020
Handlair Model 2100 Vaculator, 5” tubing, 1000 PTO, includes factory update on this model, (3) 10’ solid tubes, (1) 5’, (1) 2.5’, includes all hookups needed for 15’ flex, SN: 8410028
Vertical 8” to 10” bin unload, PTO drive
One yar old Sukup 27’ bin flooring, no stands or flashing
Unload auger with jump for 24’ bin, 6” auger, no motor
Livestock Equipment:
9’ Loading Chute on wheels
15’ Cattle crossing grate for driveway, 5’ wide
Misc pile of 16’ cattle and hog panels, approx. 10
140 gallon oval water tank
(2) 16’ Northwest Brand hog gates
True Test MP1010 Multi Purpose Chute, sheep or goats, no scale heat, 4400lb live capacity
Cattle Chute with Headgate and squeeze
25 electric fence posts, step in
25 electric fence posts, step in
25 electric fence posts, step in
25 electric fence posts, step in
25 electric fence posts, step in
Barrel of misc fiberglass electric fence posts
Pallet of 25 count T-Posts
Pallet of 25 count T-Posts
Misc pile of assorted metal posts
2 speed reels with Turbo wire on them
2 cattle dehorners
300 Livestock Eartags
Misc fence wire, some Hi-tensile
(8) 8’ cement feed bunks
(4) 8’ cement feed bunks
(3) 8’ cement feed bunks, and (1) 4’ cement feed bunk
Gehl 860 Silage Chopper with 2 row 3038 Chopping head, SN: 8685, Head SN: 13479
Gehl 800 Chopper to be sold for parts, the chopping head is still good, along with the knives, a bearing went out on the machine
(10) 20’x6 bar continuous fence panels, with clips and connectors
(10) 20’x6 bar continuous fence panels, with clips and connectors
(10) 20’x6 bar continuous fence panels, with clips and connectors
(10) 20’x6 bar continuous fence panels, with clips and connectors
(4) 8’ wood fence posts
(4) 8’ wood fence posts
(4) 8’ wood fence posts
(4) 8’ wood fence posts
(4) 8’ wood fence posts
(4) 8’ wood fence posts
(3) Wood fence posts, (2) 15’, (1) 14’
(6) 17’ fence posts
(5) 8’ Cement Feedbunks
(5) 8’ Cement Feedbunks
(5) 8’ Cement Feedbunks
Misc Electric wire and fence posts
Feed bunk cable
Round bale feeder
MC Model 9D 9’ Flail Chopper, pull type, 540 PTO, with Rollers, SN: 23468
4’ x 17’ cattle gate
Cement Feedbunks, approx. 18, various sizes on conditions, some need work
(90) 2nd cutting Alfalfa/Grass mixture bales, baled with New Holland 7090 baler and new wrapped. Approx 1,700lbs
Lawn and Garden/Recreation:
John Deere 425 All Wheel Steer 60” Lawn Mower, 2,088 hours, Power Steering, hydraulic deck lift, hydro drive, liquid cooled 20 hp John Deere Series K engine, electric PTO, SN: 023677
2009 John Deere X724 Lawn mower W/ John Deere 647 48'' rotary tiller, 62'' deck, 4 front weights, 4 wheel steer, 351 hours, cruise control, 25 horsepower engine, Mower SN: A040644, Tiller SN: B031326
2009 John Deere X724 Lawn Mower, 62” deck w/John Deere 647 48” rotary tiller, 4 front weights, All Wheel Steer, 351 hours, cruise control, 25hp engine, Mower SN: A040644, Tiller SN: B031326
Woods 1850 zero turn lawn mower, 50” deck, 3 blade, chain drive, engine was replaced with 20hp Briggs V-Twin, good tires, runs, hours unknown
Woods RD8400 3pt finishing mower, 6’, 540 PTO, SN: 7294119
Woods Model M5 Dixie Cutter Chopping Mower, 3pt, 5’, 540 PTO, SN: 105061
Craftsman Hi Performance Lawn Sweeper, approx. 42”, self dumping
2007 ADLY Her Chee 150cc moped, 4,570 miles, kick start and electric start with a new battery, 4 stroke motor, disk brakes, comes with helmet and saddle bags, good runner, VIN: 000100
1989 Suntracker 24’ Partybarge w/Mariner 90 hp 2 stroke motor, (had $3,000 of work done to motor in 2019) on 4 wheel Shore Launcher pontoon trailer with lifetime license, new floor in approx. 2015, comes with 2 fuel tanks, canopy (has tear on seam), misc chairs and life jackets, ladder, Minnkota Endura trolling motor with 40lb thrust (12volt SN: 4139104), has storage and 2 spare tires (on wrong rim, but right size of tire 5.30-12), SN: 30093G889
Kawasaki KZ550 motorcycle, VIN: 001532, unknown running/working condition, has been parked inside for years
Norton 750 Motorcycle, VIN: 136775, unknown running/working condition, has been parked inside for years
Misc Equipment:
Houle PTO Manure Pump, 540 PTO, in working order, SN: 1401-051745-R28
7’ x 13’ Rock Trailer with Hoist, good boards, hoist works, rubber is up, Lo-Boy running gear
Oliver 3 bottom on land plow
Crary Hydra Stinger 3pt Forklift/Bale Mover, 2 remotes, 1 remote for tilt, 1 remote for lift, 12’ Max height
Allied 795 Loader w/mounting bracket and 8’ bucket, no welds, nice shape
Fasse Valve
Koyker K5 loader, needs some fixing, quick tach, Euro style quick tach for bucket, no bucket, John Deere mounts off 4430
17’ Jumbo Leveler off of a John Deere chisel plow
Open Top Tunnel Shields, enough for 12 row cultivator
FMC 3 Phase 5800 Computer Wheel Balancer with Cederberg Single to 3 Phase Converter, works good
Hoffman 1610 Air Tire Machine, working order, Air Blast, 110 volt, Forward and Reverse
27’ Mayrath auger w/5hp electric motor
Drill fill auger
2019 Loftness RC800 fertilizer spreader, 90 spread, hydraulic drive, variable rate ready, scale, roll tarp, extensions, Raven ISO controller
M+W Little Red Wagon, approx. 400 bushel, brakes, 16.5L-16.1 rubber, two hoppers, rear hitch
Skidloaders/Equipment and Construction:
2014 Bobcat S510 skid loader, 5,780 hours, 2.4L Bobcat engine, 46 hp, ROPS cab only, no door, no air/heat, SN: 11375
2011 Bobcat S650 skidloader, 2,150 hours, Kubota Interim Tier 4 engine, 74 hp, 2,690lb lift capacity, heat and AC, 2 speed, radio, Power Bobtach, Deluxe cab package, new paint, tires, and bucket (on the way), reman hydro, SN: A3NV14739
2003 Bobcat S250 skid loader, 5,205 hours, Kubota V3300 engine, 2 Speed, Cab w/Heat, LED Lights, SN: 13216
1990 Bobcat 843B, 5,500 hours, Isuzu motor, 1,700lb lift capacity, ROPS cab, new tires, paint and reman hydro, rebuild chain case, SN: 32752
1981 Bobcat 843 skidloader, 4,200 hours, Perkins engine, 1,700lb lift capacity, ROPS cab, new front reman hydro drive and rebuilt chain case, SN: 5020-M-11021
1999 New Holland LX865 Skidloader, 6868 hours (might go up), foot controls, 3rd hydraulic, 7’ material bucket, manual tach, 31 x 15.5 rubber, SN: 102085
1987 John Deere 770B Motor Grader, blade and snow wing, 14:00-24 rubber, 11,706 hours, SN: 514901
2000 Genie GS-2032, 26’ working height, 32” wide, new batteries, been serviced and is ready to go, hour meter has been replaced
CAT 7’ Skidloader Bucket, step, bolt on cutting edge
Tracks off a John Deere 323E Skidloader
3 Post hole auger bits
Hawz Attachments 84” brush mower (quick tach is bent)
Hawz Attachments 66” rock bucket (bucket is bent)
Hawz Attachments tree/post puller
Hawz Attachments 74” rock bucket
Hawz Attachments 79” rock bucket (quick tach is bent)
Hawz Attachments 68” fork extensions
Hawz Attachments 68” fork extensions
Hawz Attachments solid quick tach plate
Hawz Attachments quick tach plate
Hawz Attachments quick tach plate
Hawz Attachments receiver plate
Hawz Attachments receiver palte
Trailers:
1972 Wilson Flatbed Water trailer, 42’, 11R24.5 rubber, (4) 1500 gallon water tanks, Honda GX160 gas motor and pump, also includes inductor and reel with hose, VIN: 75004
Cable spool cart, could be converted to tile cart
Campers:
2005 Fleetwood Excursion RV made by Winnebago, 63,959 miles, New Tires, New Batteries, Completely Loaded, everything is in working order, 350 CAT engine, Allison Automatic Transmission, Freightliner chassis, excellent condition
1992 NUWA 5th wheel camper, 35’, 2 slides outs, queen bed and sleeper sofa, Champagne Edition, Air Hitch Hiker Model, VIN: 046143
Vehicles:
2014 Ford Explorer Police Interceptor AWD, V-6 Flex Fuel, 18” tires with good ruber, Keypad entry, full size spare, 134,954 miles, CD/AM/FM, Aux/USB, steering wheel controls, PW, PL, VIN: 79835
2004 GMC Envoy, No Keys, (running when impounded) in Neutral now, 17” tires, PW, PL, CD, dual climate control, 2” receiver hitch
1996 Ford F-250 2wd, regular cab, 137,000 miles, automatic trans, 5.0 V-8, gas, manual windows and locks, 16” tires, city owned
2005 Chevrolet Trailblazer Ext, Blown Motor, 4x4, good rubber, (65R/17), cloth seats, 3rd row, 119,000, rear hitch
2000 Chevrolet 2500 4x4 extended cab pickup, approx. 2,000 miles on new crate engine, new tires and all new front brakes, transmission is out, needs a new transmission, have receipts for engine work
1999 Volkswagen Jetta 4 door, 2.0 L 4 cylinder engine, auto transmission, 180,000 miles, new brakes, rotors, struts, water pump and timing chain
2006 Chevrolet Trailblazer 4x4, 4 door, 190,000 miles, 6cyl engine, auto transmission, new battery, brakes, wheel bearings, water pump, and fan clutch, complete tune up
1953 (approx.) International R120 pickup, no title, it does have engine and transmission but running and working condition are unknown
2002 Ford E-450 dually, 11’ x 8’ flatbed, 7.3 diesel, 2 tool boxes, wired for a winch, 153,000 miles, automatic trans, hitch, towing mirrors, mud flaps, diamond plate running boards, VIN: 23166
Chevrolet 3500 dually, 4x4, gas, auto transmission, shows 126,000 miles, extended cab, 5th wheel call, front bucket seats, VIN: 204199
1994 Ford F250 XL single cab, 4x4 with 8’ snowplow, hydraulic tilt, lights, 5 speed trans with overdrive, V8 engine, shows 88,081 miles
1998 Chevrolet Blazer, engine is bad, drive train is good, clean title
1969 Lincoln Continental, no title, complete engine and transmission (not running)
1954 Chevrolet Station Wagon, runs and drives, 6-cylinder, 3 speed on the column
1937 Pontiac 4 door, does not run, no title
1996 Ford F-250 2wd, regular cab, 137K miles, automatic, 5.0, gas, manual windows and locks, 16'' tires
2005 Chevrolet Trailblazer ext. Blown Motor, 4wd, good rubber (65/R17), cloth seats, 3rd row, 119k miles, rear hitch.
Misc:
(2) Goodyear 320/85R34 tractor fronts on 10 bolt rims
(4) Goodyear 320/90R50 tractor tires, on rims, set up as duals, good rubber left
Westfield Drill fill auger, hyd drive, brush auger
Misc 3” Banjo fittings and valves, buying all one money
Galvanized stock tank
Haukass sidearm markers
Tailgate lift, no brand or other information on unit
3pt Hiniker head mover
Hydraulic power plant with 25hp 3 phase 480 or 2 phase 220, 1750 RPM electric motor, has hydraulic reservoir tank
12 insecticide boxes for John Deere 7000 planter with meters
Honda 20 Horsepower V-Twin motor, came off portable Auger, Throttle cable has 2 new cables
Roof wind deflector off 1994 Freightliner 60 series, no damage
(12) Suitcase weights (blue)
(5) Chemical Totes
(5) Chemical Totes
(5) Chemical Totes
(5) Chemical Totes
Bedslide retractable truck bed cargo tray, 5’ long, 47” wide, 7” tall
Chevrolet Silverado Grill, Fits 2008-2012
Roll of electrical wire
Dewalt Electric Vacuum
Spray Systems Sprayer Control
Old Safe
Smith Torch Head, Lifetime warranty
Case Vintage Wide Front
2-cylinder Wisconsin motor (stuck)
3 wheel weights, believed to be off Massey Ferguson
Allis Chalmers 3 bottom plow, slat bottoms
Wisconsin 4 cylinder engine, VH4D, engine is loose
2 wheel weights for International tractor
2 spring tooth drag sections
Stan Wagon Hoist for raising flair boxes
Pair of fenders off Allis Chalmers
Minneapolis Moline 4 bottom pull type plow
2 antique steel wheels
Pair of spoked tractor rims for rear
Pair flair box wagon hoists
Chevrolet truck, Early 50’s, does not run, no title, solid body
2 bottom pull type plow
International 2 bottom pull type plow, slat bottoms
International #9 pull type horse mower
John Deere 3 bottom pull type plow, steel wheels
Corn Crib, 13’ diameter, 12’ high with roof (to be moved)
Corn Crib, 13’ diameter, 12’ high with roof (to be moved)
Approx 142” x 6” x 6” x 3/16” Steel Square Tube with 4 Bolt Pad
Approx 142” x 6” x 6” x 3/16” Steel Square Tube with 4 Bolt Pad
Approx 142” x 6” x 6” x 3/16” Steel Square Tube with 4 Bolt Pad
Approx 142” x 6” x 6” x 3/16” Steel Square Tube with 4 Bolt Pad
Approx 142” x 6” x 6” x 3/16” Steel Square Tube with 4 Bolt Pad
H-Beam, approx. 142” x 8 3/8” x 5 3/8”x ¼” steel with 4 bolt Pad
H-Beam, approx. 100” x 8 3/8” x 5 3/8”x ¼” steel with 4 bolt Pad
Approx 149” x 6” x 6” x 3/16” Steel Square Tube with 4 Bolt Pad and extra Piece on the L
Stack of used Corrugated steel, various sizes and colors, 16 sheets ranging from 90” to 200”, 36” wide
4 sheets of brown steel, 36” wide, x 188”, used
2 sheets of tan steel, 36” wide x 222”, new
Approx. 5 sheets of misc color steel, various lengths, 36” wide
Approx. 8 sheets of misc color steel, 9’ – 202” long, 36” wide
30” saw blade
Pair of Pull Type Plows
3 steel pieces, (2) 8” x 4” x 105”, (1) 8” x 4” x 100”
(7) John Deere Planter Boxes
Antique Hay Knife
TowMax 225/75R15 tire on rim
(6) Sodium lights in working order
Stainless Steel Smoker, 110V w/Thermostat, 2 burners (one currently not working)
3 piles of misc 2x6 and 2x4 lumber
5 piles of misc 2x6, 2x4, and 2x10 lumber
Fox silage chopper, 3 row narrow head and misc parts
Cobey Silage wagon, right side front unload, steel floor
7' snowblower, unknown brand, 3pt, 540 pto, 2 stage, hydraulic spout, single auger
Ford flail mower, 6'6'', 540 pto, 3 pt.
7' 3 point blade
5' 3 point yard drage
heavy duty axle with 8-bolt hubs.
(2) 30.5L-32 Firestone tires on 10 bolt rims, 14 ply off of John Deere 9570, approx. 50%
7’ snowblower, unknown brand, 3pt, 540 PTO, 2 stage, hydraulic spout, single auger
Ford flail mower, 6’6”, 540 pto, 3pt
7’ 3pt blade
5’ 3point yard drag
Heavy duty axle with 8 bolt hubs
Steel Conveyer, approx. 20’, needs work
(8) Kinze Bean Units off John Deere 7000 planter